Dual Mono,
Building The Ultimate Sound System
Stack two devialet D-Premiers.
Get 2x400W and 0.00025% THD (Distortion).
Thanks to the Configurator and the Devialet D-Premier's software-driven hardware analog platform, each D-Premier is able to switch in a click from a 2x240W stereo mode to an ultimate 400W Mono-block with more power and higher performances.
With two Devialet D-Premiers, each one dedicated to a loudspeaker, you build the most efficient High-End setup for power-demanding loudspeakers. On top of that, sound quality is substantially enhanced, as THD (distortion) drops to 0.00025%, a world première.
Activated for free from the Configurator and installed on your D-Premier, Dual-Mono mode easily operates through a simple, digitally synchronized master-slave connection. Stack your D-Premiers, build the ultimate audio system, and control the whole thing with a single remote. Should you need, both amplifiers can switch back to stereo blocks, in a blink of an eye.
The Dual-Mono configuration sublimes the individual characteristics of each Devialet D-Premier, so that the team delivers the best performances ever reached.
"You will be delighted to know that today I took delivery of my second D-Premier and am now running two units in bridge mode into my Sonus Faber Stradivari speakers-the sound is excellent, really excellent. I have a large window open from my listening room and my wife is sitting in the garden enjoying the music (Berlioz-Symphony Fantastique as I write this email).
So this is likely to be my 'for ever' system.
If I recall correctly you are writing configuration files for individual cartridges. I have an Ortophon 2M black on my turntable. It may be that the standard MM driver works well but can I ask that you have a look and see if any tweaking is needed?
All good wishes and thanks to everyone at Devialet for a great product."
Regards,"
Mike, UK
“The 5.3 in stereo mode is a big step forward over the 4.8, with greater authority to the sound and an even more lifelike feel to the music. As for dual mono - fantastic! When I listened last night they sounded very good, but this morning they are sounding sensational - absolutely sensational! I have never heard anything as good as this. With best wishes”
Brian and Alison, UK
How To Proceed
Go to Configurator
What you need
- • 2 Devialet D-Premier.
- • 2 SD Cards (provided with your D-Premier.
- • A digital wire (S/PDIF or mixed S/PDIF-AES/EBU).
- • A computer connected to the Internet to browse the Configurator.
1 - Getting your configuration
- a - Log on to the Configurator.
-
b - Click on.
-
c - Select Dual-Mono and click "OK".
-
d - You now have 2 D-Premiers displayed.
-
e - On master unit, click WRITE CONFIG to download the new master config.
2 - On your D-Premier
- a - Put it in standby mode.
- b - Insert the SD card located at the rear.
- c - Turn it on.
3 - Repeat the process on the Slave unit
- • Get the SD card provided with your unit (located at rear of your D-Premier next to the inputs).
- • Insert it into your computer, or connect it via a USB SD card reader.
- • Once your configuration file is saved on the SD card, and the card is reinserted into your unit, the D-Premier will automatically operate according to the new settings defined.
- • Connect a digital link between the digital output DOUT of the master and the selected input of the slave
- • Connect your sources to the master.
- • At the first start, switch on your 2 D-Premier by short pressing the front D-button (after this, a single master switch on will automatically switch the slave on and off).
- • Enjoy.
